Weergave 1–16 van 84 resultaten
hand lamination at room temperature
excellent mechanical properties
suitable for glass, aramids, carbon
pultruded carbon epoxy round rods
all available in length 1000 mm
straightness 2 mm on 1000 mm
good de-airing: punctures air-bubbles
increase of glass level in laminate
push-fit for easy changing & cleaning
push-fit acetal non-stick rod
easy cleaning & long life
cost saving refills available
controlled resin to fabric weight ratio
high part uniformity and repeatability
very controlled processing by autoclave
for light-weight and high-strenght parts
highly suitable for mould manufacturing
twill woven carbon fabric width 100 cm
Industrial carbon 3K - 200Tex HS fiber
especially for RTM & vacuum infusion
high laminate strength and stiffness
for more complex formed products
bi-directional (BD) woven carbon tape
available in width 25 mm and 50 mm
for localised reinforcements
smooth surface - good impregnation
suitable for polyester & epoxy resins
for localised reinforcements
twill woven carbon fabric width 100 cm
Industrial carbon 3K - 200Tex HS fiber
especially for RTM & vacuum infusion
high laminate strength and stiffness
for more complex formed products
pultruded carbon epoxy round tubes
all available in length 1000 mm
straightness 2 mm on 1000 mm
bi-directional woven aramid tape
available in width 25 mm and 50 mm
for localised reinforcements
pultruded carbon epoxy rectangular rods
all available in length 1000 mm
straigthness 2 mm on 1000 mm
solvent resistant white bristle brush
for polyester, epoxy and vinylester
for laminating gelcoat and topcoat
uni-directional (UD) woven carbon tape
available in width 10, 25 and 50 mm
for localised reinforcements
smooth surface - good impregnation
suitable for polyester & epoxy resins
good de-airing of wet laminates
suitable for polyester & epoxy resins
easy use in large (flat) areas