smooth surface - good impregnation suitable for polyester & epoxy resins for localised reinforcements
Product Description
The E-Glass twill woven filament fabric tape (width = 5 cm) is composed of direct silane sized yarns into a bi-directional non-balanced fabric. The yarns are a bundle of endless glass filaments provided with a slight turning of appr. 20 - 40 turnings per meter. Diameter of the single glass filaments is between 9 and 13 microns.
The twill woven filament fabric tape allows a higher glass content and gives better strength properties in the mouldings compared to glass mats.
Typical end-uses: repairs, thin coatings, model making, boat construction, mould making, vehicle parts, tank construction.
The twill woven filament fabric tape with silane sizing is directly applicable with polyester-, epoxy- and vinylester resins. The very drapeable fabric tape shows good impregnation properties and gives a smooth surface to the laminates.
Typical applications:
repairs
boat construction
model making
tankbuilding
mould making
vehicle parts.
Material can be combined with polyester, epoxy and vinylester resins.
Technical Specification:
100% E-Glass twill woven filament fabric tape
Non-balanced fabric - Silane sizing
Surface weight: 282 g/m2 (+/- 1,0%)
Fabric width: 5 cm (+/- 0,5 cm) (cut edges)
Roll length: 50 mtr (2-pack); total 100 mtr
Fabric construction: Warp x Weft = 8,0 ends/cm x 6,0 picks/cm
Yarn type: Warp x Weft = direct EC11-204 Tex x direct EC11-204 Tex
